Ceramic Cyclone Liner

Ceramic Cyclone Liner Manufacturer & Global Supplier

 

We manufacture alumina ceramic liners for cyclone applications handling abrasive solids and slurry. Our alumina ceramic grades provide different alumina contents, density and strength levels for application-based selection. With more than 25 years of ceramic manufacturing experience and an established production base, we supply shaped ceramic wear products for demanding cyclone applications worldwide.

 

 
 
Why Choose Us

Established Production Base

More than 30,000 m² of production space and 300 employees provide an established manufacturing base for ceramic wear products.

Manufacturing Experience

More than 25 years of experience in wear-resistant ceramic research and production supports material selection, forming and finished-product control.

Production Capacity

Three automatic production lines support an annual capacity of 30,000 metric tons of wear-resistant ceramics.

Certified Management Systems

ISO 45001, ISO 9001 and ISO 14001 certifications provide documented systems covering occupational health and safety, quality and environmental management.

 

Where Cyclone Wear Occurs
 
Ceramic Cyclone Cone Liner

Feed Inlet: The feed area can receive concentrated particle flow and localized impact. Ceramic protection can be focused around the inlet where abrasive flow is concentrated.


Cylinder and Cone: Material moving along the internal wall produces continuous sliding abrasion and erosion. Curved or shaped ceramic sections can follow these surfaces and provide consistent coverage.


Spigot and Apex: The lower discharge section is exposed to concentrated material flow. Liner thickness and geometry can be selected according to the specific discharge configuration and wear conditions.


Vortex Finder and Outlet: These sections remain exposed to abrasive flow and require accurate fitting around their internal geometry. Ceramic sections can be shaped to match the required dimensions.

 

Ceramic Lining Configuration

 

Curved Sections: Curved ceramic pieces can follow the internal radius of the cyclone and provide more consistent surface coverage on curved areas.


Cone Sections: Tapered ceramic sections can follow the changing diameter of the cone and maintain a controlled lining profile from the upper to lower section.


Wear-Zone Sections: The lining can be divided into identifiable sections so that areas with different wear rates can be specified, inspected and replaced according to maintenance requirements.

Ceramic Cyclone Inlet Liner

 

Ceramic Material Options

92%–95% Alumina

Alumina ceramic grades with alumina contents from 92% to 95% provide practical material options for abrasive material handling applications. These grades combine high hardness, low water absorption and controlled density.

97%–99% Alumina

Higher-alumina grades with contents from 97% to 99% provide higher bulk density and strength levels. They can be considered for applications requiring different material characteristics according to operating conditions.

Grade Selection

The suitable alumina content depends on particle size, solids concentration, flow velocity, impact conditions, temperature and the location of wear. Material selection should consider the complete operating environment rather than alumina content alone.

 

Technical Specifications
 

Property

92% Alumina

95% Alumina

97% Alumina

99% Alumina

Al₂O₃ Content

≥92%

≥95%

≥97%

≥99%

Vickers Hardness

≥970 HV50

≥975 HV50

≥1300 HV50

≥1450 HV50

Water Absorption

≤0.01%

≤0.01%

≤0.01%

≤0.01%

Fracture Toughness

4.60 MPa·m¹/²

4.65 MPa·m¹/²

5.20 MPa·m¹/²

5.50 MPa·m¹/²

Bulk Density

≥3.63 g/cm³

≥3.65 g/cm³

≥3.80 g/cm³

≥3.85 g/cm³

 

Key Product Benefits

 

High Hardness

The listed alumina grades provide high ceramic hardness for contact with abrasive mineral particles, coal, slurry and other hard solids.

Low Water Absorption

Water absorption is specified at or below 0.01% across the listed grades, supporting use in wet material and slurry handling environments.

Ceramic Cyclone Barrel Liner

Controlled Material Density

Bulk density increases with alumina content, providing different material options for engineering selection according to wear conditions and equipment requirements.

Geometry-Specific Protection

Ceramic cyclone liners can use different shapes and sections for different internal surfaces, allowing the lining arrangement to follow the actual equipment geometry.

 

Custom Ceramic Cyclone Liner
 

Drawing-Based Production

Custom ceramic sections can be produced according to customer drawings and dimensional requirements. Drawings can define the required shape, radius, thickness and interface dimensions.

Shaped Ceramic Sections

Curved and tapered pieces can be produced for cyclone surfaces where standard flat ceramic pieces do not match the required profile.

Application Review

For product selection, provide the cyclone dimensions, drawing, handled material, wear location and operating conditions. These details help determine the appropriate ceramic material and lining configuration.

 

Applications
 
Heavy Medium Cyclone Ceramic Liner

Mining and Mineral Processing: Used in cyclone systems handling ore, concentrates, tailings and abrasive mineral slurry.


Coal Preparation: Suitable for cyclone components exposed to continuous coal, mineral and dense-material flow.


Cement Processing: Applicable to cyclone and separation equipment handling abrasive mineral-based materials and fine solids.


Power Generation: Used for wear protection in material handling areas exposed to abrasive coal, ash and mineral particles.


Sand and Aggregate Processing:Suitable for cyclone systems handling sand, aggregate fines and other abrasive solids.

 

Quality Control

 
 
01
 

Material Verification

Ceramic materials are controlled against specified alumina content, density, hardness, water absorption and applicable mechanical properties.

 
02
 

Dimensional Inspection

Finished liner sections are checked for dimensions and shape to support accurate fitting during assembly.

 
03
 

Batch Control

Quality checks are carried out during production and before shipment, with batch documentation available for applicable products.

Ceramic Cyclone Vortex Finder Liner

 

After-Sales Support
 
 

Technical Assistance

Technical support is available for product selection, application conditions and ceramic lining requirements.

 
 
 

Quality Issue Handling

Customer quality issues can be reviewed through the after-sales process, with technical assistance for analysis and follow-up.

 
 
 

Application Guidance

Support is available for questions concerning product use, replacement requirements and lining selection.

 

 

Packaging and Export Shipment

 

 

Protective Packing

Ceramic products can be packed in cartons or PP bags and secured on fumigated wooden pallets according to shipment requirements.

 

Palletized Loading

Palletized packing supports handling during loading, unloading and international transportation.

 

Export Coordination

Export shipment arrangements and transportation progress can be followed through the delivery process.

 

 

 

Frequently Asked Questions

 

Q: What is a ceramic cyclone liner?

A: A ceramic cyclone liner is an alumina ceramic wear lining installed on internal cyclone surfaces exposed to abrasive solids or slurry. It provides a hard wear surface between the abrasive material flow and the underlying equipment structure.

Q: Which alumina content should I choose?

A: Alumina contents from 92% to 99% provide different density and mechanical property levels. Selection depends on the material handled, particle size, flow conditions, impact, temperature and wear location.

Q: Can the liner be made to match our cyclone?

A: Yes. Custom ceramic sections can be produced according to drawings and dimensional requirements, including curved and tapered sections.

Q: Which cyclone areas can be lined?

A: Ceramic liners can be supplied for feed inlets, cylindrical sections, cone sections, spigot and apex areas, vortex finders, outlets and other specified wear zones according to the cyclone design.

Q: What information is needed for a quotation?

A: Provide the cyclone drawing or dimensions, handled material, particle size, operating conditions, current liner information and the main wear location. These details help determine the suitable ceramic material, configuration and dimensions.

 

modular-1
Request a Ceramic Cyclone Liner Quote

Send your cyclone drawing, dimensions and operating conditions. We can review the wear location and lining requirements and provide a suitable ceramic material, configuration and quotation.

As one of the leading ceramic cyclone liner manufacturers and suppliers in China, we warmly welcome you to buy preengineered ceramic cyclone liner from our factory. All customized products are with high quality and competitive price. ceramic liner

Home

Phone

E-mail

Inquiry