Ceramic Chute Liner

Ceramic Chute Liner Manufacturer & Global Supplier

 

We manufacture alumina ceramic chute liners for bulk material handling areas exposed to continuous abrasion and impact. With more than 25 years of ceramic manufacturing experience, over 30,000 m² of production space, three automatic production lines and annual capacity of 30,000 metric tons of wear-resistant ceramics, we supply different alumina grades, shapes and thicknesses for chutes, transfer points, hoppers and other wear areas.

 

 
 
Why Choose Us

Application-Based Production

We supply ceramic chute liners in different alumina grades, shapes and thicknesses to match abrasive material handling conditions. Standard and customized configurations can be produced according to chute dimensions, operating conditions and installation requirements.

Material Selection

Different alumina formulations provide options for varying levels of abrasion, impact and material handling conditions. Grade selection can be coordinated with liner thickness, geometry and installation requirements.

 

Quality Management

Production is supported by ISO 9001, ISO 14001 and ISO 45001 management systems. Material properties, dimensions and finished surfaces are checked against the applicable product requirements before shipment.

Global Supply

Export experience covering more than 40 countries supports international order coordination. Export packaging, shipment arrangements and required documentation can be prepared according to the confirmed order.

 

Wear Conditions
 
Ceramic Impact Chute Liner

Sliding Abrasion
Ore, coal, limestone, clinker and other bulk solids can continuously contact the chute surface during conveying. Dense alumina ceramic provides a hard contact surface for areas where sliding abrasion is the main wear mechanism.


Impact and Abrasion
Feed zones and transfer points can combine direct impact with sliding movement. Higher-toughness grades such as TW92S and TW95S provide additional fracture toughness for applications where impact loading needs to be considered.


Material Flow
The liner surface and tile arrangement affect material contact with the chute. Ceramic lining provides a smooth wear surface for applications where controlled material movement and limited surface retention are required.

 

Ceramic Material Selection

 

Standard Alumina Grades
TW92, TW95, TW97 and TW99 provide different alumina contents, bulk density and hardness levels. Grade selection can be based on the abrasive material, wear intensity and required physical properties.


Higher-Toughness Grades
TW92S and TW95S provide higher fracture toughness than the corresponding standard grades. These grades can be considered for chute sections where impact and abrasion occur together.


Application-Based Selection
Alumina grade should be selected together with liner thickness, tile geometry and installation method. Particle size, impact intensity, material flow and chute structure should also be considered when defining the liner specification.

Ceramic Feed Chute Liner

 

Technical Specifications
 

Grade

Al₂O₃

Bulk Density

Water Absorption

Mohs Hardness

Fracture Toughness

Flexural Strength

TW92

≥92%

≥3.63 g/cm³

≤0.01%

9

4.60 MPa·m¹/²

≥240 MPa

TW92S

≥92%

≥3.63 g/cm³

≤0.01%

9

5.70 MPa·m¹/²

≥255 MPa

TW95

≥95%

≥3.68 g/cm³

≤0.01%

9

4.65 MPa·m¹/²

≥250 MPa

TW95S

≥95%

≥3.68 g/cm³

≤0.01%

9

4.70 MPa·m¹/²

≥270 MPa

TW97

≥97%

≥3.73 g/cm³

≤0.01%

9

5.20 MPa·m¹/²

≥285 MPa

TW99

≥99%

≥3.83 g/cm³

≤0.01%

9

5.50 MPa·m¹/²

≥300 MPa

 

Chute Liner Sizes & Shapes

Standard Formats

Ceramic liner formats include plain tiles, weldable tiles, mosaic pieces and shaped sections. Common tile dimensions range from small mosaic formats to 300 × 300 mm, with thickness selected according to the ceramic grade and application.

Custom Geometry

Chutes often contain angled, curved or transitional sections that require specific liner geometry. Custom shapes can be produced from confirmed dimensions or customer drawings in DWG, PDF or STEP format.

Thickness Selection

Available ceramic thicknesses include approximately 6–50 mm for common tile formats. Final thickness should be selected according to particle size, impact level, material flow, chute geometry and available installation space.

 

Application Areas

 

Mining & Mineral Processing

Ceramic chute liners are used in ore transfer, feed and discharge sections, hoppers and transfer points where mineral materials create continuous abrasive contact.

Coal Handling

Applications include coal transfer chutes, hoppers and related material handling areas where repeated sliding contact produces surface wear.

Ceramic Transfer Chute Liner

Cement & Building Materials

Ceramic lining can be applied to selected clinker, limestone and other abrasive material transfer areas where a hard wear surface is required.

Power & Steel

Selected coal, ash, sinter and other bulk material handling areas can use alumina ceramic liners according to their temperature, impact and abrasion conditions.

 

Chute Application Positions
 

Feed & Impact Zones

The initial material contact area can receive concentrated impact, particularly when large particles enter the chute at speed. Liner grade and thickness should reflect the local loading condition.

Transfer Points

Changes in material direction can concentrate wear on impact surfaces, corners and transition sections. Ceramic pieces can be arranged to protect these localized wear areas.

Discharge & Sliding Zones

Material moving along the chute wall produces sustained sliding abrasion. Dense alumina ceramic provides a hard lining surface for these continuous-contact sections.

 

Installation Options
 
 

Adhesive Bonding

Adhesive bonding can be used when the substrate, operating temperature and service conditions are suitable for the selected bonding system. Proper surface preparation is required before installation.

 
 
 

Mechanical Fixing

Mechanical fastening can be selected for chute structures where additional retention or planned liner replacement is required. Fixing details should match the chute structure and liner configuration.

 
 
 

Pre-Engineered Configurations

Tile geometry, thickness and attachment arrangement can be coordinated before production. This allows the liner layout to follow the chute structure and defined installation requirements.

 

 

Ceramic Wear Protection Advantages
 
Alumina Ceramic Chute Panel

High Surface Hardness: The listed alumina grades have a Mohs hardness of 9. This hard ceramic surface is suited to continuous contact with abrasive mineral and bulk materials.


Dense Ceramic Structure: Bulk density ranges from 3.63 to 3.83 g/cm³ across the listed grades, while water absorption is no more than 0.01%. These properties provide a dense ceramic structure for demanding material handling applications.


Application-Specific Toughness: Fracture toughness ranges from 4.60 to 5.50 MPa·m¹/² across the listed grades. TW92S and TW95S provide additional material options where impact loading is part of the operating condition.


Material Consistency: The defined alumina grades provide measurable differences in alumina content, density, fracture toughness and flexural strength. These parameters support specification-based material selection rather than relying only on general wear descriptions.

 

Manufacturing & Quality Control

 
 
01
 

Controlled Production

Alumina powder is processed, formed, dried and sintered under controlled manufacturing conditions. Production parameters are managed according to the selected ceramic grade and product specification.

 
02
 

Batch Inspection

Quality checks cover material properties, hardness, dimensions and finished surface condition. Products are inspected against the applicable requirements before release for shipment.

 
03
 

Certification

The management systems include ISO 9001, ISO 14001 and ISO 45001 certifications. CE certification information is also available within the applicable product and company documentation.

Ceramic Impact Chute Liner

 

Custom Engineering Support

 

 

Drawing-Based Production

Custom ceramic shapes and dimensions can be produced for non-standard chute sections. DWG, PDF and STEP drawings can be reviewed when available.

 

Working Condition Review

Useful information includes material type, particle size, chute dimensions, impact conditions, operating temperature, material flow and existing liner arrangement.

 

Specification Support

The ceramic grade, shape, thickness and installation method can be reviewed together so the proposed configuration corresponds to the actual chute conditions.

 

 

Packaging & Global Delivery

 

Export Packaging
Ceramic liners are packed in carton boxes or PP bags and palletized with stretch wrapping for international shipment. Fumigated wooden pallets are used according to the applicable shipping arrangement.


International Shipping
FOB, CIF, EXW, CPT and FCA terms are available according to order requirements. Export experience across more than 40 countries supports international documentation and shipment coordination.

 

 

Frequently Asked Questions

 

Q: What materials are ceramic chute liners used for?

A: Typical applications include ore, coal, limestone, clinker, sinter, ash and other abrasive bulk materials. Grade and liner configuration should be selected according to the actual operating conditions.

Q: How do I choose the ceramic grade?

A: Consider the abrasive material, wear intensity, impact condition and required physical properties. TW92, TW92S, TW95, TW95S, TW97 and TW99 provide different material selection options.

Q: How is the required liner thickness determined?

A: Thickness should be considered together with particle size, impact level, material flow, chute geometry, operating conditions and available installation space.

Q: Can the liner be made according to our chute drawing?

A: Yes. Custom ceramic shapes and dimensions can be produced from confirmed technical drawings. DWG, PDF and STEP files can be reviewed for custom requirements.

Q: What information is needed for a quotation?

A: Provide the chute drawing or dimensions, material handled, particle size, impact conditions, operating temperature, required thickness if known and estimated quantity.

Q: What certifications are available?

A: ISO 9001, ISO 14001 and ISO 45001 certifications are available as part of the applicable management system documentation. CE certification information is also available for relevant documentation.

 

modular-1
Request a Ceramic Chute Liner Quote

Send your chute drawing, dimensions and operating conditions. We can review the application and provide a suitable ceramic grade, liner configuration and specification for your project.

As one of the leading ceramic chute liner manufacturers and suppliers in China, we warmly welcome you to buy preengineered ceramic chute liner from our factory. All customized products are with high quality and competitive price. ceramic liner

Home

Phone

E-mail

Inquiry