
Ceramic Cyclone Barrel Liner
Ceramic Cyclone Barrel Liners protect the cylindrical section of cyclone equipment from abrasive slurry, mineral particles, ash and other solids. Alumina ceramic sections are formed to the required barrel radius and installed across the specified wear area. Ceramic grade, thickness, segment dimensions and joint layout are determined from the equipment drawing and operating conditions.
Product Structure
Ceramic Wear Surface: Dense alumina ceramic forms the internal contact surface. Available grades include 92%, 95%, 97% and 99% Al₂O₃.
Cyclone Geometry: Curved ceramic sections follow the internal barrel radius. Segment size and arrangement are matched to the required diameter and lining area.
Lining Assembly: Individual sections are arranged according to the barrel profile, installation method and required internal clearance.
Where It Is Used
Mineral Processing
Applied to cyclone equipment handling mineral slurry, ore particles and abrasive classification streams.
Cement Processing
Used in cyclone systems exposed to mineral particles and abrasive process dust.
Power and Bulk Solids
Suitable for equipment handling fly ash, coal ash and other fine abrasive solids.
Key Wear Conditions
Sliding Abrasion
Continuous movement of particles along the barrel wall creates progressive surface wear. Alumina provides a hard ceramic contact surface for this service.
Particle Impact
Particle direction changes can create localized impact zones. Ceramic thickness and segment layout should reflect the actual wear pattern.
High Solid Loading
Higher solids concentration increases particle contact with the internal wall. Grade and thickness should be selected from the operating data.
Ceramic Grade Options
A standard alumina grade for general abrasive service.
Provides higher alumina content and density for more demanding wear conditions.
Suitable where higher density and mechanical strength are required.
Used where high alumina content and a dense ceramic structure are required.
Technical Specifications
|
Property |
TW92 |
TW95 |
TW97 |
TW99 |
|
Al₂O₃ Content |
≥92% |
≥95% |
≥97% |
≥99% |
|
Bulk Density |
≥3.63 g/cm³ |
≥3.68 g/cm³ |
≥3.73 g/cm³ |
≥3.83 g/cm³ |
|
Water Absorption |
≤0.01% |
≤0.01% |
≤0.01% |
≤0.01% |
|
Mohs Hardness |
9 |
9 |
9 |
9 |
|
Fracture Toughness |
4.60 MPa·m¹/² |
4.65 MPa·m¹/² |
5.20 MPa·m¹/² |
5.50 MPa·m¹/² |
|
Flexural Strength |
≥240 MPa |
≥250 MPa |
≥285 MPa |
≥300 MPa |
What Sets the Liner Configuration
Curved Segments
The ceramic radius is matched to the cyclone barrel to maintain the specified internal profile.
Joint Layout
Segment dimensions and joint positions are arranged according to barrel circumference, length and installation requirements.
Thickness Selection
Thickness is specified from particle size, solids concentration, flow conditions, wear location and available internal clearance.
Manufacturing Process
Powder Preparation
Calcined alumina powder is prepared with controlled particle characteristics before forming.
Forming
Dry pressing or cold isostatic pressing can be selected according to ceramic size, shape and dimensional requirements.
Sintering
Formed ceramic is sintered at approximately 1500–1550°C to develop a dense alumina structure.
Inspection
Chemical composition, hardness, dimensions and surface condition are checked against the specified requirements.
Selection Guide
General Abrasion
92% alumina can be considered for standard abrasive service conditions.
Increased Wear Demand
95% or 97% alumina can be selected when higher density and mechanical strength are required.
High Alumina Content
99% alumina is available for applications requiring higher ceramic purity.
Complex Geometry
Custom curved sections are suitable when barrel radius, dimensions or installation areas require a specific configuration.
Quality Control
Material Verification: Alumina content is checked against the specified ceramic grade.
Physical Properties: Density, hardness, water absorption, fracture toughness and flexural strength are controlled according to the applicable material specification.
Dimensional Inspection: Segment dimensions and profile accuracy are checked against approved drawings or dimensional requirements.
Information Required For Quotation
Equipment Data: Provide cyclone diameter, barrel length, existing liner dimensions and equipment drawings when available.
Operating Conditions: Include processed material, particle characteristics, solids concentration, flow conditions and operating temperature.
Liner Requirements: Specify ceramic grade, thickness, lined area, installation method and required quantity.
Why Ceramic Cyclone Barrel Liners Are Selected
Hard Contact Surface
Alumina ceramic provides a Mohs hardness of 9 for abrasive particle contact.
Dense Ceramic Structure
Bulk density ranges from ≥3.63 g/cm³ for TW92 to ≥3.83 g/cm³ for TW99.
Drawing-Based Geometry
Curved sections can be configured around the specified barrel radius, dimensions and lining layout.
FAQ
Q: What ceramic grade is suitable for a cyclone barrel?
A: Selection depends on particle characteristics, solids concentration, flow conditions and wear intensity. Available alumina grades include 92%, 95%, 97% and 99%.
Q: Can the liner follow an existing cyclone drawing?
A: Yes. Barrel diameter, radius, segment dimensions, thickness and joint layout can be specified from the equipment drawing or existing liner measurements.
Q: What information is needed for an inquiry?
A: Provide the cyclone drawing, barrel dimensions, processed material, operating conditions, ceramic grade, liner thickness and required quantity.
Q: Is the liner thickness fixed?
A: No. Thickness is specified according to the wear conditions, particle loading, internal clearance and required lining configuration.
Q: Can curved ceramic segments be supplied?
A: Yes. Curved sections can be specified to match the cylindrical barrel radius and required internal lining layout.
Hot Tags: ceramic cyclone barrel liner, China ceramic cyclone barrel liner manufacturers, suppliers, factory, ceramic liner
Previous
Ceramic Cyclone Inlet LinerNext
No InformationYou Might Also Like
Send Inquiry







