Nov 04, 2025 Leave a message

High-Performance Alumina And Silicon Carbide Ceramic Ballistic Plates For Advanced Armor Protection

Ceramic ballistic plates are widely used in modern personal and vehicle armor systems due to their exceptional hardness, strength, and ability to stop high-velocity projectiles. Among the available ceramic armor solutions, Alumina (Al₂O₃) and Silicon Carbide (SiC) stand out for their proven ballistic performance and weight advantages over traditional steel armor.

Compared with metal plates, ceramic armor materials offer higher impact resistance, reduced weight, and better energy absorption, making them ideal for military, law-enforcement, and security protection applications.


Advantages of Ceramic Armor

Traditional metal armor is heavy and prone to plastic deformation during impact, which reduces ballistic efficiency.
Ceramic armor, on the other hand, provides high hardness and rigidity, allowing it to break and disperse incoming projectiles while the backing material (aramid or UHMWPE) absorbs residual energy to prevent penetration.

This hybrid structure achieves efficient energy dissipation and lightweight protection.

1 1


Alumina Ceramic Ballistic Plates

High-purity alumina (≥99% α-Al₂O₃) is one of the most widely used armor ceramics due to its cost-performance advantage and stable ballistic capability. Fine powder processing and controlled sintering ensure a dense microstructure with extremely low porosity.

Key Properties - Alumina Ballistic Plates

Property Value
Material ≥99% α-Al₂O₃
Hardness ≥ HRA88
Density ≥ 3.9 g/cm³
Flexural Strength > 350 MPa
Impact Toughness ≥ 2.2 J/cm²
Elastic Modulus > 317 GPa
Water Absorption ≤ 0.02%
Ballistic Rating NIJ Level III+

Alumina plates are widely used in military and police armor systems due to their reliability and favorable production cost.

2 1


Silicon Carbide Ballistic Plates

Silicon carbide (≥98% SiC) provides higher hardness and lower density than alumina, offering lightweight protection suitable for high-threat environments.

Key Properties - Silicon Carbide Ballistic Plates

Property Value
Material ≥98% SiC
Hardness ≥ HRA92
Density ≥ 3.1 g/cm³
Flexural Strength > 400 MPa
Ballistic Rating NIJ Level IV

SiC plates are suitable for special forces, tactical units, and vehicle armor that require enhanced mobility with maximum protection.

4


Sizes & Custom Options

Standard tile sizes include:

Size Thickness
50 × 50 mm 10 mm
50 × 25 mm 10 mm

Custom services include curved plates, hexagonal tiles, and tailored thickness for different threat levels and armor systems.

3 1


About Us

With nearly 30 years of experience in advanced ceramic material manufacturing, we supply high-performance Alumina and Silicon Carbide ballistic plates with verified ballistic test data. Our products are used globally in military, law-enforcement, security, and anti-riot protection applications.

We offer technical support and customized solutions for various armor integration requirements.

Send Inquiry

Home

Phone

E-mail

Inquiry