Ceramic Impact Tile Liner

Ceramic Impact Tile Liner

Ceramic Impact Tile Liner is a composite wear panel for bulk material handling areas exposed to repeated impact and abrasive material flow.
Send Inquiry
Product Introduction

Ceramic Impact Tile Liner is a composite wear panel for bulk material handling areas exposed to repeated impact and abrasive material flow. Alumina ceramic tiles form the working surface, while rubber, polyurethane or steel-backed construction provides the required backing structure. Ceramic grade, tile dimensions, thickness, panel size and fixing method can be specified to match the equipment layout and operating conditions.

 

Product Structure

 

Alumina Ceramic Surface
The working layer uses alumina ceramic with 92–99% Al₂O₃ content. Tile thickness and dimensions are selected according to the wear area, material flow and available installation space.


Composite Backing
Rubber, polyurethane or steel-backed construction can be used beneath the ceramic layer. The backing structure is selected according to impact conditions, panel design and fixing requirements.

 

Key Product Benefits

 

Abrasion Protection
The alumina ceramic surface provides the exposed wear layer for abrasive solids moving across chutes, hoppers, transfer points and related material handling surfaces.


Impact Control
The backing layer provides a transition between the ceramic tiles and equipment surface, making the composite structure suitable for areas subject to repeated material impact.


Configurable Geometry
Tile size, ceramic thickness and panel dimensions can be matched to flat, curved or segmented installation areas.


Sectional Replacement
Panel construction allows individual sections to be replaced according to the actual wear layout rather than removing the complete lining area.

 

Technical Specifications

 

Parameter

Specification

Alumina content

92–99% Al₂O₃

Ceramic hardness

Up to approx. 9 Mohs

Ceramic thickness

1.5–50 mm

Ceramic tile size

10 × 10 mm to 100 × 150 mm

Panel size

200 × 200 mm to 600 × 600 mm

Steel backing thickness

3–10 mm

Backing options

Rubber, polyurethane, steel-backed

Surface configuration

Plain or shaped ceramic surface

Fixing options

Adhesive, mechanical or bolted

 

How to Select the Liner

 

Impact Zone
Identify where material first contacts the equipment and where the highest concentration of impact occurs. These areas determine the required liner construction and ceramic thickness.


Material Flow
Sliding, falling and redirected material create different wear patterns. Flow direction and contact area should be considered when planning tile arrangement and panel coverage.


Installation Clearance
The available space inside the equipment determines the total liner profile. Ceramic and backing thickness should be checked together before finalizing the panel dimensions.

 

Where It Is Used

Transfer Chutes

Installed at transfer points where falling material changes direction and then moves across the protected surface.

Feed Zones

Used around loading areas receiving concentrated material flow from upstream handling sections.

Discharge Sections

Applied where material exits a process or conveying section and contacts the chute surface at an angle.

Hoppers and Bunkers

Used in loading and storage areas exposed to repeated material impact and abrasive flow.

Typical Industries

01/

Mining
Applied to mineral handling areas, transfer points and chute sections exposed to abrasive bulk solids.

02/

Cement
Used in material transfer, feed and discharge areas handling abrasive raw materials and processed solids.

03/

Steel and Metallurgy
Suitable for bulk material handling sections where concentrated impact and sliding abrasion occur.

04/

Power Generation
Used in material transfer and handling areas requiring a ceramic wear surface with a composite backing.

Panel Configuration

 

Standard Panel Sizes: Available panel dimensions include 200 × 200, 250 × 250, 300 × 300, 390 × 390, 400 × 400, 500 × 500 and 600 × 600 mm.


Ceramic Geometry: Tile dimensions range from 10 × 10 mm to 100 × 150 mm. Tile size can be selected according to surface geometry, joint layout and required coverage.


Steel-Backed Option: Steel backing from 3–10 mm can be incorporated where mechanical or bolted installation is required.

 

Installation Considerations

 

Surface Preparation: The mounting surface should be clean, dry and properly prepared for the selected fixing method.


Panel Layout: Panel joints and dimensions should follow the equipment geometry to maintain consistent coverage and provide practical access for future replacement.


Fixing Method: Adhesive, mechanical fixing or bolted steel-backed construction can be selected according to equipment structure and installation conditions.

 

Inspection and Quality Control

 

Dimensional Inspection
Ceramic thickness, tile dimensions and finished panel dimensions are checked against the specified requirements.
Material Verification
Ceramic grade and backing construction are controlled according to the agreed technical specification.
Assembly Inspection
Tile arrangement, backing structure and fixing configuration are checked before packing to maintain consistency between finished panels.

 

Packaging and Delivery

 

Panel Protection
Finished panels are separated and protected during packing to protect ceramic surfaces and panel edges during handling.
Export Packing
Cartons, pallets or wooden cases can be selected according to panel dimensions, quantity and transportation requirements.
Packing Identification
Package markings can include specification, dimensions, quantity and order identification to support receiving and installation control.

 

Information Required for an Inquiry

Equipment Details

Provide the equipment type, installation position and approximate protected area.

Operating Conditions

Material type, particle size, flow direction and impact location help determine the appropriate liner construction.

Product Dimensions

Specify ceramic thickness, panel dimensions, tile size, backing type and fixing method where available.

Drawings

Equipment drawings, liner layouts or marked dimensions help confirm panel geometry and fixing positions before production.

FAQ

 

Q: What alumina grades are available?

A: Alumina ceramic options range from 92% to 99% Al₂O₃. The appropriate grade can be specified according to the application requirements.

Q: What ceramic thicknesses are available?

A: Ceramic thickness ranges from 1.5 mm to 50 mm, depending on the required panel construction.

Q: Can panel dimensions be customized?

A: Yes. Standard panel dimensions are available, and panel geometry can be specified according to equipment dimensions and installation drawings.

Q: Can steel backing be included?

A: Yes. Steel-backed construction is available with steel thickness from 3 mm to 10 mm for mechanical or bolted installation.

Q: What information is needed for product selection?

A: Equipment location, material characteristics, impact area, liner dimensions, fixing method and available drawings provide the main technical information required for configuration.

Q: Where is Ceramic Impact Tile Liner used?

A: Typical locations include transfer chutes, feed zones, discharge sections, hoppers and bunkers where material impact and abrasive flow occur together.

Hot Tags: ceramic impact tile liner, China ceramic impact tile liner manufacturers, suppliers, factory, Removable Ceramic Conveyor Linings

Send Inquiry

Home

Phone

E-mail

Inquiry